Wave Blaster II 750 (1996-97)

Custom-Patterned Watercraft Covers

Premium custom-patterned covers provide maximum protection and are loaded with features that make the covers easy to use.  Covercraft covers protect against ultraviolet (UV) damage, bird droppings, tree sap and air pollutants - elements that can ruin the finish of an expensive watercraft.

Designed for use while trailering, choose from two marine-tested fabrics that will protect the body, paint and graphics from the elements.  Both materials are made using stable dying processes to assure the color won't transfer to the watercraft, a problem that can occur with low-quality cover fabrics.

Choose from two fabrics to help protect your PWC

Sumbrella

 A preferred fabric in the marine industry, Sunbrella is made from solution-dyed woven acrylic fibers that provide almost 100% UV opacity to stop UV rays from reaching the gel-coat, graphics, rubber and seating material on your watercraft.  The solution-dyed process is eco-friendly because the color goes into the polymer BEFORE the fibers are extruded, so the color is solid throughout the woven fabric.  Sunbrella is very fade resistant and that's why you'll see it in marinas used for sail covers, bimini tops and boat enclosures, and it's also used for most high-quality outdoor furniture, patio umbrellas and awnings.  The acrylic fibers naturally resist moisture, rot and mildew - for maximum long-term UV protection Sunbrella is the best choice!  Sunbrella covers carry a five-year limited warranty to the original purchaser.  (Covercraft will repair or replace any cover that becomes unserviceable during normal use - subject to factory inspection).

Glen-Tuf™  Made of woven polypropylene by the same mill as Sunbrella, this surface-dyed fabric was developed to provide a less expensive alternative to Sunbrella while still maintaining good abrasion resistance, an important criteria for any material used while towing.  Polypropylene fabric resist moisture, rot and mildew and is coated for UV resistance.  Glen-Tuf is better than most OE and import covers and inlides all the great features noted below.  Glen-Tuf covers carry a three-year limited warranty to the original purchaser.  (Covercraft will repair or replace any cover that becomes unserviceable during normal use - subject to factory inspection).

Features & Benefits

• All stress seams are overlapped and double stitched for superior strength.
• Strong, bar-tacked tie-down loops secure cover on watercraft for trailering.
• The underside of the cover has heavy-duty, double layer reinforcement panels in high abrasion areas.
• There are reinforced openings for trailer pins and security straps.
• An adjustable, heavy-duty, multi-strand shock cord is sewn around the entire hem.
• Reflexite® safety reflector strips are sewn on the back end of the cover to give additional warning notice when
  the watercraft is moored or on a trailer.  (Reflexite meets both Federal and USCG specifications.)
• Behind the handlebars, along the top of the cover, there is a non-scratch, corrosion-free access zipper for vest and wet suit storage. 
  There is also a sewn-in quick-dry mesh bag, with hook & loop closure, for storing gloves, goggles and other small items.
• Zippered gas cap access panel allows fueling while the watercraft is on a trailer.